Guest H5N1_HoSt Posted October 9, 2007 (edited) Quel Water Cooler serait le plus adapté pour le C2D E6700? Voici ma config. C2D E6700 @ 3.5 / Asus P5B / ASUS 8800GTX / 2GO PC-8000 OCZ XTC 5-5-5-15 / Cooler Master 500W / Zalman Fan 9700 / 250GO SATA 16 meg + 200GO SATA 8 MEG / Dual Boot XP/Vista Ultimate 64 Bits / SynMaster Samsung 22* 226BW / Souris Microsoft Habu 2000 DPI Pui'je atteindre les 4 GHZ selon vous avec ce E6700? http://img.photobucket.com/albums/v352/stepan1968/cpuz.jpg J'suis a 39 C sur l'IDLE et a 46 Full charge avec la 9700. Et selon vous quel est le meilleur magasin pour les pièce pour faire du tuning? Merci! Edited October 9, 2007 by H5N1_HoSt Share this post Link to post Share on other sites
Guest H5N1_HoSt Posted October 9, 2007 Il est possible pour toi d'atteindre le 4Ghz la seul chose est que ca va probablement chauffer fort. J'ai egalement un E6700 et je le maintient a 3.6Ghz avec 42 C Idle et 65 C Avec Orthos avec mon Zalman 9700 . Mon water cooling me donnait 200Mhz de plus pour approx les meme temps sous le water cool. Mon processeur pourrait probablement booter a 4Ghz sous l'eau mais en aucun temp il serait stable. Ce que je considere stable c'est au moin 3 heures sous orthos. Si tu cherche du water cooling et un case, j'ai peu etre quelque chose pour toi. Ayoye!!..J'suis dans l'champ pas a peu près! J'essaye Orthos et 49 seconde plus tard j'suis dans le deep red,plus rouge que ça t'est menstrué!Non sans farce c'est drôle pcq je joue a FEAR et Lost Planet Et Quake War pendant des heures! et ça roule hyper fluide et ça plante JAMAIS. Je l'ai tester autant comme autant avec différente fréquence et ça n'a JAMAIS planté sauf avec ce Orthos,c,est a dire l'ordin plante pas mais Orthos me dit que j'ai un ardware failure.alors je doit être trop chaud en full charge. Peut-être que comme tu le mentionne 4GHZ stable c'est irréaliste,mais j'aimerais bien un petit 3.8 stable,j'aimerais bien aussi une bonne fan pour pouvoir overclocker ma 8800GTX. Mais j'y pense..qu'a tu a me proposer? Share this post Link to post Share on other sites
Guest H5N1_HoSt Posted October 9, 2007 J'ai ceci a vendre. http://www.qctuningpc.net/forum/viewtopic.php?id=4250 200$ tout compris?...Installation incluse?? Share this post Link to post Share on other sites
Guest H5N1_HoSt Posted October 9, 2007 Si tu apporte tes composantes je t'installe pour rien, mais tu doit te deplacer chez moi a GatineauMais si j'achète ton système jusqu'a ou je vais pouvoir monter avec mon E6700? Share this post Link to post Share on other sites
Sim123456 0 Posted October 22, 2007 C'est quoi la différence en orthos et OCCT? Quand j'ai essayé Orthos, le cpu était en charge à 75% contrairement au 98% d'OCCT Share this post Link to post Share on other sites
Sim123456 0 Posted October 23, 2007 (edited) Peut-être que c'est différent pour un Quad, quand je l'ais essayé, je roulais aussi Speedfan et ça m'indiquait 75% contrairement à OCCT. Je vais le réessayer, ça m'intrigues J'ai fait le test, 61% au max, seulement 2 coeurs d'utilisés, alors à moins qu'il y ai une option quad core? Edited October 23, 2007 by Sim123456 Share this post Link to post Share on other sites
SHaCK 0 Posted October 24, 2007 Ça l'air que ça fonctionne bien en roulant 4 instances de prime95 1) Install Prime95 2) Create four shortcuts of the installed Prime95 3) You need to change the shortcuts so they run as different instances. Right-click one of the shortcuts, go to "Properties", then to the "Shortcut" tab. At the end of the target line put a blank space, and add -A1 (so it's " –A1") 4) Repeat step three for two other shortcuts you created (but change the extra characters you put at the end). You should now have one shortcut that is not modified, and three other ones modified differently (A1, A2, A3). 5) Open all four instances (the four shortcuts). 6) On the top toolbar, go to Advanced > Affinity, and uncheck "Let program run on any CPU". Leave the 0 in the box for the first one, and put a "1" in the box for the second instance. 7) Repeat step six for the other two instances. You should now have four instances of Prime95 open, each with a different affinity (0, 1, 2, 3). 8) Go to Options> Torture Test > Custom > Memory to use in (MB). This should be 1/4 of your AVAILABLE system memory for each instance. As an example, I have 1GB of RAM, a dual-core CPU, and Windows XP that uses 256MB of RAM while idle. This means that I have 768MB of available RAM. Now, I divide 768MB up in half for my two cores, so I set each instance to use 384MB of RAM. As for your situation, just take about 256MB of RAM from your total memory, then divide that into four. Input that amount into each of your instances of Prime95. 9) Click OK and let it run! Share this post Link to post Share on other sites
Sim123456 0 Posted October 24, 2007 C'est pas plus simple de rouler OCCT? Share this post Link to post Share on other sites
SHaCK 0 Posted October 25, 2007 Ah bin je croyais que OCCT ne loadait pas tout tes core a 100% :spamafaute: Share this post Link to post Share on other sites
Sim123456 0 Posted October 26, 2007 Oui les 4 coeurs en full load contrairement à Orthos qui m'en roule juste 2 C'est facile à vérifier, juste à regarder sur speefan Share this post Link to post Share on other sites