VGA cooler pour sapphire HD 2400

Allo les boys je cherche un coller pour ma carte graphique .. mais sur zalman et thermalright je trouve rien qui est compatible avec cette carte .. Peut etre juste leur site qui donne des information erroné .. En tk je voulais savoir si vous connaissiez un compatible a coup sure ??

merci de votre aide .. j'ai jaamais changer sa avant .. mais je trouve quelle chauffe un peu trop a mon goût ..

=================================

L3. Best Air coolers for HD2400/HD2600 Series + Installation and Warning notes.

=================================

Please note, this section is to refer to coolers that will work with the HD2k Series, EXCLUDING the 2900s. Basically these coolers will work with the HD2400 and HD2600.

First off we must note the heat output of the cards. The HD2400 Series generally tends to have a large and passive heatsink. The fact that the HD2400 Series is not intended for any gaming at all, but for a media centre justifies the lack of the need for any aftermarket solution to be installed. Due to the reasons that:

-Aftermarket cooling will be larger than the stock solution

-The stock cooling solution is more than capable of cooling the graphics card, due to the extremely low heat output of the core.

These are the main two reasons. The only consumers who purchase a HD2400 will probably do no gaming at all. Installing aftermarket solutions moreover presents a installation risk, due to the extremely small die size. It's a waste of money to buy an aftermarket solution for the HD2400 as the passive solution keeps the temperatures around 35*C~45*C, idle and load, which means that aftermarket cooling is a waste.

Moreover, overclocking a card will not generate much more heat, thus it is safe to say that the HD2400 is excluded from this article.

The HD2600PRO/XT however, is a different story. Generally their stock coolers are good, yet, may NOT be quiet. Overclocking these cards as well as voltmodding will somewhat overwhelm most stock solutions.

Now for the coolers that are recommended for the HD2600/HD2400s:

VF700ALCU/CU

As I stated previously, this cooler should not be underestimated. It is inexpensive as well as being a quiet cooler, the HD2600 has a lower heat output in contrast to the X1950s (in the previous article). Overall recommended, I would purchase the ALCU version to cut down on weight however. Expect temperatures ranging from 35*C~45*C Idle, 45*C~50*C Load, at MOST. Be careful to check if the cooler is sitting flat on the chip however, temperatures much worse than this (60*C) is telling you that the cooler is not sitting flush and half of it may be having no contact, this is a substantial issue with the VF700s installed on GPUs with small dies and no shim.

VF900CU

Same as above, however a step up in price, the VF900CU should yield even better results. 30*C Idle ~ 45*C Load.

Other coolers

Generally… HD2600/HD2400s have an extremely low heat output, thus, any other coolers which are stated to be compatible can be considered. However, these two coolers are recommended for their wide availability, especially the VF700, with its low price and good performance.

the VF900CU should yield even better results. 30*C Idle ~ 45*C Load.

c'est pas mal sa que je veut comme résultat =)

Vais prendre le premier http://www.microbytes.com/computer/ordinateur/product_info.php?cPath=4000153&products_id=19734 il est moin couteux

Merci encore voodoo